hey guys
Id used freertos to create a couple tasks earlier and run it on pic32mx starter kit.. It ran fine.. When i run it on the mplab sim tool, context switch does not occur.. Two processes a and b are present of the highest priority.. Im incrementing a counter in each.. Only one counter gets incremented.. Im using the official pic32 port..
No context switch using MPSIM on pic32
No context switch using MPSIM on pic32
The PIC32 port was written some time ago. I know, at that time, it could not be simulated in the PIC32 simulator as the simulator did not simulate everything. As I say, that was some time ago, so I don’t know if this is still the case.
Regards.
No context switch using MPSIM on pic32
I can confirm that it still doesnt support mpsim.. works fine on the kit