I am not sure whether is problem in ethernet link between my laptop and device.
I am using code from below directory:
** FreeRTOSV9.0.0rc1FreeRTOSV9.0.0rc1FreeRTOSDemoRX600RX63N-RDKRenesas**
RTOS Demo vuIP_Task issue on RX63N
Hello,
I am running RTOS Demo on RX63N .RTOS is working and LEDs are blinking but when comes to vuIP_Task , it is coming at below instructions again and again:
while( lEMACWaitForLink() != pdPASS )
{
vTaskDelay( uipINIT_WAIT );
}
RTOS Demo vuIP_Task issue on RX63N
Have you stepped through the lEMACWaitForLink() function to see what it
is doing? As far as I can see all it is doing is calling
physetautonegotiate(), which is a Renesas library fucntion, and the
function is failing. Therefore your network initialisation is failing –
which could be a cabling problem, or perhaps your hardware has a
different PHY to the hardware on which the demo was created.
[the demo you are using is making use of uIP – all the demos we create
these days use our own TCP/IP stack called FreeRTOS+TCP. See
http://www.freertos.org/tcp ]
RTOS Demo vuIP_Task issue on RX63N
Actually I am using RX62N RDK but FreeRTOSV9.0.0rc1FreeRTOSV9.0.0rc1FreeRTOSDemoRX600RX62N-RDKRenesas
demo is giving compiler not found error on HEW IDE.
so i had tried RX63N demo.
I had also tried a demo without FreeRTOS which runs uIP stack on RX62N . I see same ethernet phy driver is being used with FreeRTOS demo.
While developing demo on RX62N and RX63N , did you see any difference in ethernet phy driver in RX62N and RX63N RDK?
RTOS Demo vuIP_Task issue on RX63N
I had also tried a demo without FreeRTOS which runs uIP stack on RX62N .…and did that work?
While developing demo on RX62N and RX63N , did you see any difference in ethernet phy driver in RX62N and RX63N RDK?Can’t remember I’m afraid – the schematics for the boards would presumably show which PHY was used on each though.
RTOS Demo vuIP_Task issue on RX63N
I had also tried a demo without FreeRTOS which runs uIP stack on RX62N .
…and did that work?
Yeah it is working.
On 05-Apr-2016 6:09 PM, “Real Time Engineers ltd.” rtel@users.sf.net
wrote:
I had also tried a demo without FreeRTOS which runs uIP stack on RX62N . …and did that work? While developing demo on RX62N and RX63N , did you see any difference in ethernet phy driver in RX62N and RX63N RDK? Can’t remember I’m afraid – the schematics for the boards wouldpresumably show which PHY was used on each though.
RTOS Demo vuIP_Task issue on RX63Nhttps://sourceforge.net/p/freertos/discussion/382005/thread/099ded7e/?limit=25#a37a/fc94
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/freertos/discussion/382005/ To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
RTOS Demo vuIP_Task issue on RX63N
may be you can give this a try:
http://interactive.freertos.org/entries/109317096-TCP-IP-Networkinterface-for-RX6xx
RTOS Demo vuIP_Task issue on RX63N
TCP-IP-Networkinterface-for-RX6xxGreat, thanks !
It looks good to me. Savindra : if you decide to use FreeRTOS+TCP along with mentioned driver: feel free to ask any questions about it. Regards.
- zero Copy
- “should” work, but
- not well tested
- hence, no copy right, no guarantee
RTOS Demo vuIP_Task issue on RX63N
Hi!
I just tried to switch from uIP to FreeRTOS+TCP along with the driver available at http://interactive.freertos.org/entries/109317096-TCP-IP-Networkinterface-for-RX6xx
and found this thread were it was mentionned.
Has someone used it successfully? – I’m stuck with file mac.h, which seems to be missing.
Best regards,
Stephan