Hi ,
How to install the interrupts in the freeRTOS?
Thanks,
Nagaraju
How to install the interrupt handlers
How to install the interrupt handlers
Depends on the port you are using.
How to install the interrupt handlers
If i see the example in interrupt management in FreeRTOS they are using __dos_setvect(0x82,handlerName) api and to generate the interrupt __asm(int 0x82).
Is there an particular API is dedicated in FreeRTOS to register the interrupt. I am using ti stellaris LM3s9b96 board to test the same example.Please suggest me .
How to install the interrupt handlers
I have no idea what that code is, it looks like an old MS DOS program.
You are using a Cortex-M3 chip which has a simple vector table in which you place the names of the ISR functions in the appropriate place for the interrupt being handled. This is normally done at compile time to keep the vector table out of RAM.
Refer to your compiler documentation and the examples in the download. There is no special API for installing interrupts on that chip because none is needed.