Hello,
I am following the steps in the following tutorial:
http://www.elektronikpraxis.vogel.de/fileserver/vogelonline/files/419.pdf
I arrived at launching the external tool: “OpenOCD Programmer”, but I am having the following problem in the console:
Info: openocd.c:84 main(): Open On-Chip Debugger (2006-11-22 14:00 CEST)
Error: ft2232.c:164 ft2232_write(): FT_Write returned: 4
Error: ft2232.c:346 ft2232_send_and_recv(): couldn’t write MPSSE commands to FT2232
Knowing that the drivers are properly configured in windows, how can I proceed to identify the source of the problem?
Thanks.
Error when using Openocd in freertos tutorial
Error when using Openocd in freertos tutorial
Well, it worked.
The board was powered from a USB hub without mains power, which lead to the inability to write anything to it.