HCS12 and HCS12X unsupported port
I found on the unsupported ports a port for the HCS12 and HCS12X using CodeWarrior made by Ole Asbjørn Fadum.
File: HCS12_HCS12X_CodeWarrior_OAF.zip
Is it possible to know if this port would run in the Freescale mc9s12xet256?
thanks
HCS12 and HCS12X unsupported port
No idea, but if the CPU core is the same then there is no reason why not, once the linker scripts have been adjusted.
HCS12 and HCS12X unsupported port
Hi everyone….
I have have downloaded the latest version of FreeRTOS. i wanted to port it to HCS12X controller.
I found on the unsupported ports a port for the HCS12X using CodeWarrior made tried to unzip that file. It asks for some password.hence i am unable to use that port….anyone knows about the password or is there any other way to use this HCs12X port.
HCS12 and HCS12X unsupported port
I just tried opening the .zip file HCS12_HCS12X_CodeWarrior_OAF.zip from the FreeRTOS/Demo/Unsupported folder, and was not asked for a password. Is this the file you are using?
Regards
HCS12 and HCS12X unsupported port
Hi Richard, Thanks for replying.
Yes i am using the same zip file.
The FreeRTOS version i am using is FreeRTOSV5.4.0.
Can u please tell me how did u unzip it. and which is the Codewarrior version u are using because if i skip the password and unzip the file. I gat a partially unzipped folder. And when i later open the project under CodeWarrior V4.6, it says project cannot be opened.
HCS12 and HCS12X unsupported port
Seems to open ok in CodeWarrior for Microcontrollers V6.2 – doesn’t seem to build though.
Regards.
HCS12 and HCS12X unsupported port
Hi everyone,
I tried to use the Freertos unsupported port for HCS12X. but i was not able to Make the project. Has anyone worked in this regard?