FreeRtos porting to Raspberry Pi 3
Hi
I am trying to port the FreeRtos with RPI 3 , so i followed the steps provided in the below link
https://github.com/jameswalmsley/RaspberryPi-FreeRTOS
After successful build , we replaced /boot/kernal.img with the new kernal.img which we generated and when we booted ,still we are able to see only the raspbian os instead of FreeRtos
Please help us to overcome this issue , is anything has to be done extra
Note:
Whether we can Port FreeRtos with Raspberry pi 3???
please Help
Regards
Sakthi
FreeRtos porting to Raspberry Pi 3
Just like the last post I replied to, I’m afraid you are using third
party code on an architecture we don’t support ourselves – so I’m afraid
I don’t know where to start in replying. The only thing I could do is
to obtain the board, tools and third party code myself and try it ….
and that would take a long time.
FreeRtos porting to Raspberry Pi 3
23.12.2018
I am very surprised an FREERTOS that the raspberry pi 3 is not really supported.
There are ports but the all seem to be incomplete and are not stable.
I do not need to tell you the the RPi ha a huge number of users and the a RTOS would be a huge
benefit to the RPi community.
Will the FREERTOS consider this?
BD
FreeRtos porting to Raspberry Pi 3
It is something we consider quite often, but it is somewhat outside of
our primary MCU market, and our roadmap going forward has a lot that
will inevitable be higher priority.