TCPEchoClient_SingleTasks.o', needed by
RTOSDemo.elf’. Stop. RTOSDemo C/C++ Problem
If anybody has face this issue earlier. Please help me to resolve it. Thanks
Including FreeRTOS+ TCP in a FreeRTOS project
Hy..I’m working to include FreeRTOS+ TCP in my FreeRTOS project. I have followed all the steps given in following FreeRTOS link.
http://www.freertos.org/FreeRTOS-Plus/FreeRTOSPlusTCP/TCPNetworkingTutorialAddingSource_Files.html
But When I try to build my project. It gives me following error:
make: *** No rule to make target
Including FreeRTOS+ TCP in a FreeRTOS project
Hi Muhammad, what platform are you using?
It looks like any of these files is missing in your project:
~~~
FreeRTOS-Plus/Demo/Common/FreeRTOSPlusTCPDemos/TCPEchoClientSingleTasks.c
FreeRTOS-Plus/Demo/FreeRTOSPlusTCPandFATWindowsSimulator/DemoTasks/TCPEchoClientSingleTasks.c
FreeRTOS-Plus/Demo/FreeRTOSPlusTCPMinimalWindowsSimulator/DemoTasks/TCPEchoClient_SingleTasks.c
~~~
Including FreeRTOS+ TCP in a FreeRTOS project
Hi Hein, Thanks for your help.
I’m using ZC702 HW Platform.
I have included paths of the directories where the files you mentioned in your comment exists. But it gives me the same error.
Basically I want to include FreeRTOS+ TCP in my Blinky Demo Application provided by FreeRTOS for ZC702 HW Platform.
Including FreeRTOS+ TCP in a FreeRTOS project
If you’re working on ZC702, you can also try the FreeRTOS+TCP Zynq project:
~~~
FreeRTOS-Plus/Demo/FreeRTOSPlusTCPandFATZynqSDK
~~~
That already includes +TCP.
Including FreeRTOS+ TCP in a FreeRTOS project
Here I’m attaching the latest version of the driver for Zynq.
Make sure that you project does not contain the previous versions of these files:
~~~
emacpsif.h
emacpsifdma.c
emacpsifhw.c
emacpsifhw.h
emacpsifphyspeed.c
xtopology.h
~~~
Including FreeRTOS+ TCP in a FreeRTOS project
Basically, First I have used this Demo:
FreeRTOS-Plus/Demo/FreeRTOSPlusTCPandFATZynqSDK
It was working fine with my TCP application.
But when i included my basic application (that is used to capture some interrupts from MIO pins) in this Demo, it doesnot capture external interrupts. so I was moved here to include FreeRTOS+ TCP DEMO in the project.
So I was not sure whether I can use FreeRTOSPlusTCPandFATZynqSDK Demo for Interrupt capture application or not. that’s why i was moved here to include TCP+ application in my project.
Including FreeRTOS+ TCP in a FreeRTOS project
XScuGicConfig *pxGICConfig; BaseTypet xStatus;
pxGICConfig = XScuGic_LookupConfig( XPAR_SCUGIC_SINGLE_DEVICE_ID );
configASSERT( pxGICConfig );
configASSERT( pxGICConfig->CpuBaseAddress == ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET ) );
configASSERT( pxGICConfig->DistBaseAddress == configINTERRUPT_CONTROLLER_BASE_ADDRESS );
xStatus = XScuGic_CfgInitialize( &xInterruptController, pxGICConfig, pxGICConfig->CpuBaseAddress );
configASSERT( xStatus == XST_SUCCESS );
( void ) xStatus;
XGpioPs_Config *pxConfigPtr;
BaseType_t xStatus1;
pxConfigPtr = XGpioPs_LookupConfig(XPAR_XGPIOPS_0_DEVICE_ID);
xStatus1 = XGpioPs_CfgInitialize(&xGpio, pxConfigPtr,pxConfigPtr->BaseAddr);
configASSERT( xStatus1 == XST_SUCCESS );
( void ) xStatus1;
XGpioPs_SetDirectionPin(&xGpio, ZYNQ_GPIO_INTERRUPT_PIN_JE1, 0);
XScuGic_Connect(&xInterruptController, GPIO_INTERRUPT_ID,
(Xil_ExceptionHandler)XGpioPs_IntrHandler,
&xGpio);
XGpioPs_SetIntrTypePin(&xGpio, ZYNQ_GPIO_INTERRUPT_PIN_JE1, XGPIOPS_IRQ_TYPE_EDGE_RISING);
XGpioPs_SetCallbackHandler(&xGpio, (void *)&xGpio, (void *)GPIOIntrHandler);
xil_printf(“Declaration Function is called rn”);
XGpioPs_IntrEnablePin(&xGpio, ZYNQ_GPIO_INTERRUPT_PIN_JE1);
XScuGic_Enable(&xInterruptController, GPIO_INTERRUPT_ID);
This is the code that I have used for interrupt enabling in freeRTOS+ TCP. but when it reaches to the line XScuGic_Enable, it stucks.