Hi all,
My current setup is like this
1. Microcontroller – AT32UC3A0512
2. Development Board – EVK1105
3. I am using FreeRTOS. In the current FreeRTOS demo-program currently there is serial.c driver is there for one USART port. Can anybody give me some code or suggest me what to change if I need to use two USART ports?
USART0 – Is connected to my PC. I am using PuTTy terminal for communication to board in RS232 mode. Baudrate – 57600, databit – 8, No parity, stopbit-1, normal channel mode,no flow control
USART2 – I have connected to another module. which has configuration as baudrate – 19200, databits – 7, Odd parity, stopbit-1, normal channel mode, no flow control
External module connected to USART2 sends me continues data like databyte1-databyte2-databyte3——–databyte9-‘n’-‘r’ – databyte1(repeat of sequence). I want to take these data recieved at USART2 and transmit on USART0. But I am not getting any output.
Following are my observation till now.
In the demo program we have enabled only the USART0. I am able to receive the character and able to transmit the same on the same USART0 in a perfect manner. But When I plug my usart cable to USART2 port on the board, that is also working although i haven’t activated it. I am able to send receive characters on this port. But on USART2 the I get a junk character after each 8 to 10 good characters. I am not able to understand the things. I am very poor in looking into datasheet things also. If any experienced guy here can help I would appreciate it a lot..
NOTE:This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the FreeRTOS forums.
FreeRTOS Support Archive
The FreeRTOS support forum can be used for active support both from Amazon Web Services and the community. In return for using our software for free, we request you play fair and do your bit to help others! Sign up for an account and receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the FreeRTOS forums.
[FreeRTOS Home]
[Live FreeRTOS Forum]
[FAQ]
[Archive Top]
[June 2011 Threads]
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.