NOTE:This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the
FreeRTOS forums.
FreeRTOS Support Archive
The FreeRTOS support forum can be used for active support both from Amazon Web Services and the community. In return for using our software for free, we request you play fair and do your bit to help others! Sign up for an account and receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the FreeRTOS forums.
[FreeRTOS Home]
[Live FreeRTOS Forum]
[FAQ]
[Archive Top]
[March 2010 Threads]
PIC32 demo and switch inputs
Posted by
barbercolman on March 5, 2010
I have been looking at the PIC32 demo and though that the switches on the explorer or PIC32 board would be read as part of the demo. Either the switches are not read or I missed something big time.
PIC32 demo and switch inputs
Posted by
davedoors on March 6, 2010
The demo projects normally write to LEDs but don’t read from switches. You should find example code to do that in the projects that come with the hardware.
PIC32 demo and switch inputs
Posted by
barbercolman on March 8, 2010
That is my plan. I was just surprised that there was not a RTOS example of reading switch input.
I plan on using the Microchip AN1227 as a starting point for reading a keyboard and sending data to the display driver.
thanks
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.