Task Not Starting
Hello,
I thought there was a recent post about tasks not starting in certain conditions – I saw the one regarding the queue fix – but has there been any other
problems in the recent past?
I looked through the forum back through July and didn’t see anything – and did a search but the search comes up with a lot of hits when you use the
word ‘task’.
I’m seeing a condition where vPortYield runs once, and that’s it. That particular task never runs again. I just see the
IDLE task running after that. I only have the IDLE task and a ‘test’ task running since I’m debugging some stack issues.
Thanks,
John W.
Task Not Starting
Is this using the MSP430? I know you are an expert on the RTOS so don’t want to ask obvious questions, but are you positive that the tick interrupt is running?
Task Not Starting
Hello Dave,
I appreciate the accolades.
Yes, the timer2ISR is running – this is for the 8051/8052 C8051F120.
I thought there had been some posts in the recent past about tasks not running – maybe this only had to do with the queue.c fix.
I’m running the ‘tip-of-tree’ so to speak – the 4.5.0 preview/prerelease.
Curious issue is the timer2ISR runs, but I don’t see the LED task in this case, ever trying to run again. It’s as if it’s been suspended
indefinitely.
Thanks,
John W.