HI,
I am usiing the ARM7_LPC2368_Eclipse+ webdemo for Embedded artist LPC2468 board.i have modified the emac.c file for macrel phy.(EA using macrel phy) i could receive the ping packet but its not transmitting back.Using the IP address 192.168.1.100 and 192.168.1.103 and netmask 255.255.255.0. with direct cross cable.
i have 2 issues
1. packet is not transmitting from board(receiving correctly,enabled the tx register,correct destination address)
2 #defined Ip address(uIP_task.c) of board is changing after some duration.
has anybody using the same board and faced the issue.please give your suggestions regarding the issue
thanks
NOTE:This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the FreeRTOS forums.
FreeRTOS Support Archive
The FreeRTOS support forum can be used for active support both from Amazon Web Services and the community. In return for using our software for free, we request you play fair and do your bit to help others! Sign up for an account and receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the FreeRTOS forums.
[FreeRTOS Home]
[Live FreeRTOS Forum]
[FAQ]
[Archive Top]
[September 2009 Threads]
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.